The Optosil®/Xantopren® assortment is a complete system. Components can be individually combined for all impression techniques. For best results
usage with other silicon materials and Activators is not recommended. Visually inspect for damage before fi rst use. Damaged products must not be used.
Close carefully after use.
Pouring the model:
Pouring can take place 30 minutes after the impression is removed from the mouth. Impressions remain dimensional stable up to 7 days.
Recommended model material:
All commercially available modeling stones can be used.
Our suggestion: Class III Gips, MOLDANO®/MOLDADUR® or Class IV Gips, MOLDASTONE®/MOLDASYNT®
Electroplating:
Impressions may be copper or silver plated in the usual way.
Disinfection:
Impressions should generally be treated by immersion for 10 minutes* in 5,25 % Sodium Hypochlorite solution.
Other silicon specifi c disinfectant solutions should be used as directed by the products manufacturer.
Adhesion:
We always recommend the use of our Universal Adhesive.
Storage conditions:
Do not store above 25 °C/77 °F.
Warning and precaution for Activator universal Plus:
Flammable. Inhalation can cause health problems. Eyes, respiratory organs and skin can be irritated. In an emergency, rinse off immediately with copious amounts of water and consult an eye specialist. Avoid skin contact.
Wear protective clothing. Wear suitable gloves (EN 374, category III, e.g. Dermatril from KCL, Germany). Do not swallow and ingest. If health problems arise after swallowing impression material, seek medical attention
immediately. Intestinal blockage may arise in rare cases. Hypersensitive persons may experience an allergic reaction to the product. Not recommended for breast feeding patients and children under 6 years.
For use by dental personnel only.
Ελληνικά 
