Characteristics
Hand spray lubricant that does not dissolve in your sterilizer. Re-lubrication is not required after sterilization. One spray before sterilization is sufficient. Lubricates and cleans in one step. It does not contain any additional cleaners or conditioners to confuse the maintenance process. It has a pleasant smell.
Indications
The lubrication - cleaning of all high-speed, low-speed corner handles, as well as straights.
Using the appropriate adapter, spray for two (2) seconds into the hole on the back of the handle. Once a week spray the shaft on the front of the handle.
Run the handle for five (5) to ten (10) seconds to push out excess oil. This must be done at the central unit.
Wipe the outside of the handle. Use only pure alcohol because other solutions contain substances that are likely to cause unevenness on the outer and inner parts of the handle.
Sterilize the handpiece as directed by the manufacturer. Usually you let the handle go through the drying cycle. We suggest using paper bags on one side and plastic on the other.
Remove the handle from the sterilizer and allow to cool to room temperature. If you use "hot" handles you will reduce the life of the turbine.
Caution
FLAMMABLE
Keep away from sources of ignition
No smoking.
Avoid contact with skin and eyes.
In case of contact with eyes, rinse immediately with plenty of water and contact your doctor.
Reference code: LU1011
500ml Lubricating fluid
Ελληνικά 
