Temp Bond ΝΕ 65gr 61085

Classification
TempBond™ ISO 3107 Type I, Class 1 - Zinc Oxide/Eugenol Cement
TempBond™ NE ISO 3107 Type I, Class 1 - Zinc Oxide/Non-Eugenol Cement

Description:
TempBond temporary cement product series consists of TempBond, TempBond NE and TempBond Clear with Triclosan. Each is designed
to be suitable for various applications such as cementing temporary crowns, bridges, inlays, onlays and splints. It has excellent flow to permit
the restoration to be easily and completely seated. It is strong enough to withstand the stresses of mastication, yet permits easy removal of the
restoration when this is desired. TempBond and TempBond NE are available in traditional tubes, Unidose™ single-use foil pouches, and automix dual
barrel syringes. TempBond Clear with Triclosan is available in an automix dual barrel syringe, and contains triclosan.

Directions for use:
Work Time and Set Time:
At the ideal mixing conditions of 70-77 °F (21-25 °C) and 40-60% relative humidity, the following work time and setting time from start of mixing are
obtained:
Work Time (mm:ss)     Set Time (mm:ss) 
TempBond > 1:30     < 7:00
TempBond NE > 1:30     < 7:00

Mixing:
Tube: Extrude equal lengths of Base and Accelerator onto the mixing pad provided. The length to be extruded will depend on the size and type of restoration
to be cemented. Replace caps tightly on tubes after use. Thoroughly mix the pastes for approximately 30 seconds.

Unidose: Cut along dotted line with scissors, dispense contents of pouch onto mixing pad. Thoroughly mix the pastes for approximately 30 seconds.

Syringe: Remove cap from syringe. Always bleed syringe upon the initial use.
Place automix tip onto syringe. Turn automix tip 90 degree to lock in place. The material is now ready to be dispensed directly onto the temporary or the tooth prep. 
No hand mixing is necessary.

Preparation and application
Dry the prepared teeth and the surface of the restoration. Apply a thin layer of the mixed cement to the internal surfaces of the temporary restoration. Firmly seat the
restoration in the mouth. After the material has set remove excess material with a scaler or other instrument.

Note
A softer cement can be obtained by adding up to 25%, by volume, white petrolatum in TempBond and TempBond NE.

Cautions
TempBond contains eugenol. A small number of patients may experience an allergic reaction to eugenol. Caution is recommended with these patients.
TempBond NE may contain trace amounts of eugenol.

Storage
Store at ambient temperature.

Shelf life
Refer to outer package for expiration date. Do not use after expiry date.